GPSPATRON

The GP-Cloud anomaly detection and classification algorithms are sensitive to the “correct” setup of GNSS antennas and are calibrated under the following wo...

For normal operation of the probe, it is necessary to ensure a satisfactory Signal-to-Noise Ratio (SNR or CN0) for GNSS satellites. To ensure a good perform...

The probe can be connected to GP-Cloud through the built-in 4G modem or via the Ethernet port. You can find the current connection method on the fifth page ...

Overview This article applies to both GP-Cloud-based anomaly detection algorithms and the onboard signal processing (OSP) algorithms in GP-Probe DIN L1. If...