GPSPATRON

This guide provides detailed steps to update the firmware of the Adalm Pluto SDR device to operate with the GP-Jammer application.

Prerequisites:

• A computer with GP-Jammer software installed.
• Adalm Pluto SDR device connected to the computer via USB.

Step-by-Step Instructions:

    1. Check Device Connection:

• Connect your Adalm Pluto SDR to the computer.
• Open the GP-Jammer application.
• In the dashboard, the Adalm Pluto will be displayed even if it is not correctly configured. If the device requires a firmware update, you will see an error symbol (⚠️) next to its name.

    2. Access the Firmware Update Menu:

• Double-click on the Adalm Pluto entry in the dashboard to access its settings.
• If the firmware is outdated or needs updating, the "Firmware" button will flash red.
• Click on the flashing "Firmware" button.

    3. Select the Correct COM Port:

• Ensure you have selected the correct COM port for the Adalm Pluto. This is crucial for a successful update. Refer to the COM port selection guide for assistance: https://support.gpspatron.com/en/support/solutions/articles/101000535587-how-to-choose-the-correct-com-port
  

    4. Initiate the Firmware Update: 

• Click the "Update Firmware" button.
• The update process will begin, showing a status window with messages such as "Downloading," "Copying," and "Firmware update in progress."

Important: Do not disconnect the Adalm Pluto during the update process. Interrupting the update could render the device non-functional, requiring recovery using a hardware programmer.

   5. Monitor the Update Process: 

• During the update, the LED1 indicator on the Adalm Pluto will blink rapidly.
• Wait for the LED1 indicator to stop blinking rapidly—this indicates the update process is complete.
• GP-Jammer will automatically detect the completion of the update and close the firmware update window.

    6. Verify the Update: 

• After the update, the error symbol (⚠️) next to the Adalm Pluto should disappear.

  The device should now display a green status indicator (✅), indicating that it is properly configured and ready for use.

Troubleshooting:

If the Update Fails:

• Try changing the USB port on your computer and restart the update process.
• Ensure that you have selected the correct COM port again after changing the USB port.
• If the issue persists, contact technical support for further assistance.

Always ensure the Adalm Pluto remains connected to the computer throughout the update process to prevent any potential issues.